Gianluca Fabbri holds a degree in Electrical
Engineering ( “Sapienza” University of Rome ) and a double European PhD
in Electrical Engineering (“Sapienza” University of Rome and Madrid
Polytechnic University).
He is actually joining the Pole for Sustainable Mobility
(POMOS) of Sapienza Unversity of Rome, constantly working on R&D
activities, together with highly skilled European companies and Universities
and being the responsible of the Fundings and Projects Division.
He has deep experience in the technical and administrative coordination
of EU, National and International Projects and in the coordination and
preparation of proposal submissions providing strategic and technical advice
and assistance to the development and management of cofunded projects on RTD
and Innovation, Environment, ICT, Energy and Transportation and also in
Fund-raising activities for international cooperation and bilateral projects,
assistance to preparation of tenders and project proposals.
He is author of various papers published in technical journals and
conference proceedings. Highly experienced on technology transfer activities,
he promoted, supported and coordinated with POMOS, SMEs participation in
R&D National and European projects.
On various occasions, he was invited to serve as Visiting Professor,
Chairman, Research Fellow by universities and research institutes. In the
meantime, he participates actively as specialist researcher and consultant in
various projects concerning renewable energy, energy production systems, energy
savings and automotive applications and sustainable mobility.
He is the CEO of the company DINESTO, Drive the Innovation in Energy
Storage, the first Innovative Start up of Lazio and is an independent
consultant among
Universities and Research Centres, Foundations and Companies.
Education
- Degree
in Electrical Engineering, La Sapienza University, Rome. Thesis: “Design of a control system
for drive-by-the-wire vehicles”. This thesis was carried out with a
scholarship to do research at Arizona State University.
- Double
European Ph.D in Electrical Engineering La Sapienza University of Rome and
Madrid Polytechnic University. Thesis subject: “Simulations of energy
Systems for Distribute Generation and Renewable Energy Plants” .
- Research
grant at the Department of Electrical and Computer Engineering -
University of Coimbra. Research subject:” Innovative technologies for
the generation and storage of energy for telecommunications applications”.
- Certified
engineer
- High
school diploma (technical), ITIS F.Severi, Rome.
Research Activities
·
High and medium temperature Fuel Cells for stationary applications.
·
Innovative technologies for the generation and storage of energy for
telecommunications applications.
·
Trigeneration energy systems.
·
Development of models and tools for the simulation of Stand Alone Power
Systems (SAPS) .
·
Dynamic models of wind-photovoltaic hybrid stand alone generators.
·
Modelling and simulation of low-output renewable energy systems and
numerical optimization techniques for the design of these systems.
·
Hybrid and Electric Vehicles.
·
Bioelectrical non invasive probes.
·
Smart grids and V2G/G2V.
·
Open innovation.
·
Member of the IEEE/IES Technical Committee on Energy Storage Devices and
Systems.
·
Member of the commission for the evaluation of International PhD at the
Madrid Polytechnic University and the National
Institute of Technology of Rourkela.
Teaching Activities
·
Teaching at the ROTOLION Master in Sustainable Mobility and Efficiency.
·
Teaching at the Center for Creative Leadership, Belgium.
·
Teaching university course on Energy Management at the University of
Rome La sapienza Energetic Department.
·
Teaching courses and workshops for Business International.
·
Teaching courses for the University Master in Facility Management for
Global Care at the Biomedical University Campus of Rome.
·
Teaching for the course on Photovoltaic Plants for the Order of the
Engineers of Rome.
·
Teaching at the SEFDoF, summer school for Photovoltaic.
·
Teaching courses for the MasterGem in green Economy Management.
·
Teaching and support of lessons and courses given by the La
Sapienza Electrical Engineering Department an INFOCOM Department.
List of Funded Research Projects
§ SMARTMOB2.0: 1 year regional project for the development of a mobility
platform (2015). Call: VAL Insieme per Vincere; Number of partners involved:
15, Cost: 10 M€, Role: Preparation of the technical and economical proposal,
construction of the partnership, General Project Management.
§ DINESTO, Drive the Innovation in Energy Storage; 1 year project for the
start up of an innovative spin-off in the field of energy storage,(2014), Call:
Start up Lazio, cost: 0,13 M€. Role: Preparation of the technical and economical
proposal, CEO.
§ HI-ZEV: Three years project (2012-2015) for the development o fan
ecological sport car. Call: Industria 2015. Number of Partners involved: 20.
Budget: 9M€. Role: Preparation of the technical and economical proposal,
construction of the partnership, General Project Management.
§ HI-QUAD: Three years project (2012-2015) for the development of an
hybrid quadricycle. Call: Industria 2015. Cal:l Industria 2015. Number of
Partners involved: 20. Budget 12M€; Role: Preparation of the technical and
economical proposal, construction of the partnership.
§ ROTOLION: Three years project (2013-2015) for the development of a quick battery replacement system trough a sustainable automatic station. Call: Programma Operativo Nazionale Ricerca e Competitività 2007-2013. Number of Partners involved: 3. Budget: 4.3 M €. The project include the organization of an advanced university Master on Sustainable Mobility and Renewable Energy. Role: Preparation of the technical and economical proposal, construction of the partnership, Responsible for the Master.
§ ROTOLION: Three years project (2013-2015) for the development of a quick battery replacement system trough a sustainable automatic station. Call: Programma Operativo Nazionale Ricerca e Competitività 2007-2013. Number of Partners involved: 3. Budget: 4.3 M €. The project include the organization of an advanced university Master on Sustainable Mobility and Renewable Energy. Role: Preparation of the technical and economical proposal, construction of the partnership, Responsible for the Master.
§ NESM: Full Electric New Electric Minicar, Safe, Ecologic, Economic, Easy
to drive, Appealing, Light. Call: Co-Research, Number of Partners involved: 4.
Budget: 0.6 M€; Role: Preparation of the technical and
economical proposal, construction of the partnership.
§ FEMAG-T: Two years project (2011-2012) for the development of an
hybrid powertrain. Call: Frontiere Tecnologiche POR Lazio. Number of
Partners involved: 3. Budget: 0,6 M€. Role: Preparation of the technical and
economical proposal, construction of the partnership, General Project
Management.
§ ECO-CHASSIS: Two years project (2011-2012) for the development of a
modular platform for hybrid and electric vehicles Call: Frontiere Tecnologiche
POR Lazio. Number of Partners involved: 3. Budget: 0,6 M€¸ Role: Preparation of
the technical and economical proposal, construction of the partnership, General
Project Management.
§ ECO-QUAD: Three years project for the development of a net for the development of
an industrial chain for the spread of hybrid and electric vehicle (2011-2013).
Partners involved: 5. Budget: 0,1 M€. Role: Preparation of the technical and
economical proposal, construction of the partnership, General Project
Management.
§ PRESS4TRANSPORT: Two year EU project for the development of a virtual
platform on transport. (2010-2011) Number of Partners involved: 5. Cost:
0.8 M€: Role: Preparation of the technical and economical proposal,
Project Management.
§ VENTOTENE Zero Emission Island (2010). Project for the implementation of
Sustainable Mobility Solutions on the island of Ventotene. Number of Partners
involved: 5 .Budget: 0,3 M€. Role: Preparation of the technical and economical
proposal, construction of the partnership, General Project Management.
§ FLYWHEEL Joint research project between Italy and Argentina to study
alternative storage systems. Period:(2008-2009). Role: Preparation of the
technical and economical proposal, Project Management.
§ ERSATRITCOM Three years EU project for the development of an
experimental prototype of an innovative hybrid trigeneration system for telecom
applications (2011-2013). Cost: 0,2 M €. Role: Preparation of the
technical and economical proposal, construction of the partnership, Project
Management.
Work Experience
Actual Position
· Innovation fundings, business strategies and project management of
R&D activities at the Pole for Sustainable Mobility, Sapienza, University
of Rome.
· CEO of DINESTO, Drive the Innovation in Energy Storage.
· Independent Consultant for the preparation of project proposals for funding from the EU, National and
Regional programs, Innovation processes and technology transfer,building of academic and
private networks.
· Contract Researcher at the Institute of Telecommunications at the University
of Coimbra, Portugal. Research subject:” Innovative technologies for the
generation and storage of energy for telecommunications applications”.
Past positions
· Overseas Department Project Manager for the installation of conventional
and renewable electrical-energy production systems, Nuova Carrel S.p.A. This
position has entailed sojourns in Jordon, Lebanon, Iraq and Kosovo.
· Design and installation of stand alone solar energy systems for rural
applications in Libya, Tunisia and Egypt, Frei S.r.l.
· Specialist researcher on a two-year project for the production and
testing of a thermo/electric co-generator prototype and the resulting
industrial production, Advanced Devices S.p.a.
· Specialist researcher on a three-year project for the production of the
prototype of a high-temperature advanced Fuel Cell SOFC with thin planary,
electrolite cells for the distributed generation of thermal and electrical
energy, Nuova Carrel S.p.a.
·
Development of a prototype micro-turbine with the Mechanics Department
of the University of Amman.
·
Collaboration with Milan-based firm Real Industria s.r.l. on research
projects and feasibility studies.
·
Construction of internet sites and multimedia applications, MEDIAFORME.
·
Set up of exhibition stands at the RAI Congress Centre in Amsterdam.
· Collaboration with UNISYS as an expert on software applied to the
medical field with participation at conferences in Italy and abroad.
Consultancy Experience
· Consulting and design in the field of electrical systems and energy
saving and other engineering research, Global Engineering.
· Consulting in the preparation of project proposals for funding from the
EU, the Italian Higher Education, Research and Technology Ministry and the
Italian Production Activities Ministry, Frei S.r.l.
· Experience of research and consultancy in public and private, in the
development of innovation processes and technology transfer and construction of
university and private networks.
· Experience of project management in national and European R&D
projects, in technology transfer projects mainly in the fields of energy,
sustainable mobility and ICT.
Foreign Languages
·
Good written and spoken English.
·
Good Spanish.
Information Technology Skills
·
Operating systems: MS-DOS, Windows.
·
Languages: Basic, Pascal, Fortran, Html.
·
Applications: Office package, Macromedia package, CAD, Simulink.
Peer reviewed conferences:
1. G.Fabbri, E.Santini, P.Sordi, “AN SPM MOTOR FOR A DRIVE-BY-THE-WIRE
STEERING SYSTEM”, ICEM 2002 15th International Conference on Electrical
Machines,
2. C. Boccaletti, G. Di Grazia, G. Fabbri, E. Nisticò, "ENERGY MODELS
FOR STAND ALONE POWER SYSTEMS", EETI 2004-5th International Congress
Energy, Environment and Technological Innovation,
3. G. Fabbri, E. Nisticò, E.Santini “BUILDING SIMULATION MODELLING ENVIRONMENTS”,
PSE05 5th International Conference on Power Systems and Electromagnetic
compatibility August 23-25, 2005, Corfu Island (Greece).
4. G. Fabbri, E. Nisticò, E.Santini, “DESIGN OF CAST-RESIN DISTRIBUTION
TRANSFORMERS BY MEANS OF GENETIC ALGORITHMS”, SPEEDAM 2006.
5. C.Boccaletti, G.
Fabbri, E.Santini, “FUEL CELL SYSTEMS SIMULATION”, ICEM 2006.
6. C.Boccaletti,
G.Duni, G. Fabbri, E.Santini, "A TOOL FOR THE SIMULATION OF INTEGRATED
RENEWABLE ENERGY FUEL CELL SYSTEMS", ENER 2006, Figueira da Foz
(PORTUGAL).
7. C.Boccaletti,
G.Duni, G. Fabbri, F.M. Frattale Mascioli, E.Santini, "TECHNICAL AND
ECONOMIC FEASIBILITY STUDY OF A SMALL HYBRID VEHICLE FOR URBAN
TRANSPORTATION", Workshop on Hybrid and Solar Vehicles 2006, Salerno,
Italy.
8. C.Boccaletti, G. Fabbri, E.Santini, "A REFORMER MODEL FOR FUEL CELL
POWER SYSTEMS", POWERENG 2007 Setúbal, (Portugal).
9. C. Boccaletti, G. Fabbri, O. Riot, E. Santini, "MODELLING AND
SIMULATION OF HYBRID SOFC-GT SYSTEMS FOR DISTRIBUTED GENERATION", ICREPQ
2007, Valencia, Spain.
10. A.Antonelli,
C.Boccaletti, G.Duni, G.Fabbri, “REMOTE CONTROL AND MONITORING OF AN INDUCTION
MOTOR”, COMADEM07
11. C.Boccaletti,
G.Fabbri, E.Santini, “INNOVATIVE SOLUTIONS FOR STAND ALONE SYSTEMS POWERING”,
INTELEC 2007 International Telecommunications Energy Conference 30-sept 4-ott
2007 Rome.
12. C.Boccaletti, G.Duni,
G.Fabbri, E.Santini, “ALTERNATIVE SIMULATION METHOD FOR AN AFDM MACHINE”, ISEF
2007 International Symposium on Electromagnetic Fields in Mechatronics,
electrical and Electronic Engineering, Praga 13-15 Sett 2007
13. G. Fabbri, J.Marco,
E.Santini, “APPLICATIONS OF FUEL CELLS IN DISTRIBUTED GENERATION”,
C.Boccaletti, ICEM ’08 - XVIII International Conference on Electrical Machines
14. C.Boccaletti,
G.Fabbri, J.Marco, E.Santini, “HYBRID CONFIGURATIONS FOR SAPS”,
EuroPES 2008 8th IASTED International Conference on Power and Energy Systems
15. C.Boccaletti,
F.Castrica, G.Fabbri, M.Santello, “A NON-INVASIVE BIOPOTENTIAL ELECTRODE FOR
THE CORRECT DETECTION OF BIOELECTRICAL CURRENTS”, Biomed2008 sixth IASTED
International conference on Biomedical Engineering
16. C.Boccaletti,
G.Fabbri, J.Marco, E.Santini, “RENEWABLE ENERGY IN DEVELOPING COUNTRIES:
THE CASE OF GUINEA BISSAU”, ICREPQ08 International Conference on Renewable
Energy and Power Quality
17. G. Fabbri, F.M.F. Mascioli , S. Valentini,
“SUSTAINABLE MOBILITY MODELS FOR THE ISLAND OF VENTOTENE”, International
Multi-Conference on Complexity, Informatics and Cybernetics, IMCIC2010
18. G. Fabbri , C. Boccaletti, A. J. Marques Cardoso , F.Castrica, “A
SOFTWARE TOOL FOR THE EVALUATION OF BIOELECTRICAL CURRENTS BEHAVIOUR”, International Multi-Conference on
Complexity, Informatics and Cybernetic, IMCIC2010
19. G.Fabbri, C.Boccaletti, A. J. Marques Cardoso, F.Castrica, “A BIOELCTRICAL SENSOR FOR THE
DETECTION OF SMALL BIOLOGICAL CURRENTS”, ICST2010, Proceedings of The 4th International Conference on Sensing
Technology.
20. G. Fabbri, C. Boccaletti, A. J. Marques Cardoso , F.Castrica, “A SOFTWARE
TOOL FOR THE EVALUATION OF BIOELECTRICAL CURRENTS BEHAVIOUR”, Journal of
Systemics, Cybernetics and Informatics.
21. G. Fabbri , C. Boccaletti, A. J. Marques Cardoso , “A HYBRID STAND
ALONE POWER SYSTEM FOR TELECOM APPLICATIONS IN MINOR ISLANDS”, ICEM 2010 International Conference on
Electrical Machines.
22. G. Fabbri, “INTELLIGENT TRANSPORTATION SYSTEMS: AUTOMATIC VEHICLE
LOCATION AND MONITORING SYSTEMS”, Thematic Fiches from the Press4transport
consortium, June 2010.
23. G. Fabbri, “INTELLIGENT TRANSPORTATION SYSTEMS: SUSTAINABLE MOBILITY
PILOT RESEARCH PROJECTS IN TOURISTIC AREAS ”, Thematic Fiches from the
Press4transport consortium, June 2010.
24. L. Petrucci, G. Fabbri , C. Boccaletti, A. J. Marques Cardoso, “POWERING
AND COOLING OF A SERVER ROOM USING A HYBRID TRIGENERATION SYSTEM”,
IEE-ICCSIT2011, International Conference on Computer Science and Information
Technology.
25. G. Fabbri, C. Boccaletti, L. Anniballi, M. London, F.M.F.Mascioli,
F.Calenne, A. J. Marques Cardoso, “ADDING ICT TO TRANSPORTATION SYSTEMS:
MONITORING AND MANAGEMENT STSTEM FOR THE ELECTRIC VEHICLE FLEET ON THE ISLAND
OF VENTOTENE”, IEE-ICCSIT2011, International Conference on Computer Science and
Information Technology.
26. G. Fabbri, M. Paschero, “HYBRID AND ELECTRIC PROPULSION: FOCUSING ON
NATIONAL EU R&D PROJECTS”, Thematic Fiches from the Press4transport
consortium, June 2011.
27. G. Fabbri, M. Paschero, A. Cardoso, C. Boccaletti, A. J. Marques
Cardoso, F. M. F. Mascioli, “A BATTERY MODEL BASED ON GENETIC ALGORITHM FOR
STAND ALONE POWER SYSTEMS AND RADIO BASE SYSTEMS POWERING”, 33rd IEEE
International Telecommunications Energy Conference, INTELEC 2011, October 2011.
28. G. Fabbri, A. Cardoso, C. Boccaletti, A. Girimonti, “CONTROL AND
OPTIMISATION OF POWER CONSUMPTION IN RADIO BASE STATION POWERING”, 33rd IEEE
International Telecommunications Energy Conference, INTELEC 2011, October 2011.
29. G. Fabbri, M. Paschero, G. Del Vescovo, H. Chiacchierini, A. Rizzi, F.
M. Frattale Mascioli, “A SIMULATION TOOL FOR THE MANAGEMENT OF ENERGY FLOWS IN
HYBRID ELECTRIC VEHICLES”, ISIE 2012 – The 21th IEEE International Symposium on
Industrial Electronics, 28-31 May 2012, Hangzhou, Zhejiang, China.
30. M. Paschero, G. Del Vescovo, L. Benucci, A, Rizzi, M. Santello, G.
Fabbri, F.M. Frattale Mascioli “A REAL TIME CLASSIFIER FOR EMOTION AND STRESS
RECOGNITION IN A VEHICLE DRIVER”, ISIE 2012 – The 21th IEEE International
Symposium on Industrial Electronics, 28-31 May 2012, Hangzhou, Zhejiang, China.
31. G. Fabbri, A. J. M. Cardoso, C. Boccaletti, A. Carta, F.M. Frattale
Mascioli “SIMULATION AND DESIGN OF A PHOTOVOLTAIC ROOF FOR AUTOMOTIVE
APPLICATIONS”, ISIE 2012 – The 21th IEEE International Symposium on Industrial
Electronics, 28-31 May 2012, Hangzhou, Zhejiang, China.
32. G. Fabbri, F. Calenne, M. London, C. Boccaletti, A. J. Marques Cardoso,
F.M. Frattale Mascioli “DEVELOPMENT OF AN ON-BOARD UNIT FOR THE MONITORING AND
MANAGEMENT OF AN ELECTRIC FLEET”, The 20th International Conference on
Electrical Machines, ICEM’2012, September 2-5, 2012, Marseille – France.
33. G. Fabbri, F.M.F.Mascioli, M. Dessì, M. London, F.Calenne “SUSTAINABLE
MOBILITY IN URBAN AND TOURISTIC AREAS”, EWGT, 15th meeting of the Euro working
Group on Transportation, Septmber 10-13 2012, Paris, France.
34. G. Fabbri, M. Pasquali, F. M. F. Mascioli, “Automotive Application of
Lithium-ion batteries: a new generation of electrode materials”, 22nd IEEE
International Symposium on Industrial Electronics, Taipei, Taiwan, May 28-31,
2013.
35. G. Fabbri, F. Serra, M. Paschero, F. M. F. Mascioli, “Development of an
Innovative Direct Injection LPG System for ICE and Extended Range Electric
Vehicles”, 22nd IEEE International Symposium on Industrial Electronics, Taipei,
Taiwan, May 28-31, 2013.
36. G. Fabbri, M. Paschero, F.M.F. Mascioli, “Energy Storage Devices for
Telecommunication: the case of a Radio Base Stand Alone System”, 22nd IEEE
International Symposium on Industrial Electronics, Taipei, Taiwan, May 28-31,
2013.
37. M. Paschero, G. Del Vescovo, G. Fabbri, F.M.F. Mascioli “Design and
implementation of a fast recharge station for electric vehicles”, 22nd IEEE
International Symposium on Industrial Electronics, Taipei, Taiwan, May 28-31,
2013.
38. G. Fabbri, F.M.F. Mascioli., M. Paschero, M. Dessì, “Sustainable Mobility
in Urban and Touristic Areas”, 18 th International Conference on Urban Planning
and Regional Development in the Information Society 20-23 May 2013, Rome,
Italy.
39. G. Fabbri, F. M. Frattale Mascioli, “An Integrated Sustainable Mobility
Territorial System”, Fourth IEEE International Conference on Information
Science and Technology (ICIST 2014) Shenzhen,
Guangdong, China, April 26-28 2014.
40. G. Fabbri, G. Tarquini, L. Pasquali, M. Antonucci, “Innovation
Management of a High-Technology Academic Start Up: the case of DINESTO”, 23nd IEEE International Symposium on Industrial Electronics, Istanbul,
Turkey, June 01-04, 2014.
41. A. Dell'Era, G. Fabbri, L. Pasquali, G. Tarquini, M. Pasquali, E.
Santini, “ Automotive Application of Lithium-ion batteries”, 23nd IEEE International Symposium on Industrial Electronics, Istanbul,
Turkey, June 01-04, 2014.
42. G. Fabbri, M. Dessi, S. Sgreccia, M. Paschero, F. M. Frattale.
Mascioli., L. Anniballi, S. Nardecchia, “Bonifica 2.0 : an Integrated
Territorial System of Sustainable Mobility and Micro Smart Grids”, 23nd IEEE
International Symposium on Industrial Electronics, Istanbul, Turkey, June
01-04, 2014.
43. G. Fabbri, S. Odoardi, G. Tarquini, L. Pasquali, S. Teodori, E. Santini,
“Impact of V2G/G2V Technologies on Distributed Generation Systems, 23nd
IEEE International Symposium on Industrial Electronics, Istanbul, Turkey, June
01-04, 2014.
Peer reviewed
Journal Papers:
1. C. Boccaletti, G. Fabbri, O. Riot, E. Santini
(2007). Modeling and
simulation of hybrid SOFC-GT systems for Distributed Generation. RENEWABLE
ENERGY & POWER QUALITY JOURNAL, 2007.
2. C. Boccaletti, G. Fabbri, J. Marco, E. Santini
(2008). An Overview on
Renewable Energy Technologies for Developing Countries: the case of Guinea
Bissau. RENEWABLE ENERGY & POWER QUALITY JOURNAL, 2008.
3. G. Fabbri, A.
J. Marques Cardoso, C. Boccaletti, L. Castrica, “A SOFTWARE TOOL FOR THE
EVALUATION OF THE BEHAVIOUR OF BIOELECTRICAL CURRENTS”, Journal of Systemics,
Cybernetics and Informatics, Volume 9, Number 3, pp. 79-84, Year 2011.
4. L. Petrucci, G.
Fabbri , C. Boccaletti, A. J. Marques Cardoso, “POWERING AND COOLING OF A
SERVER ROOM USING A HYBRID TRIGENERATION SYSTEM”, International Journal of
Computer Theory and Engineering (IJCTE) vol. 5, p. 263-267 2013.
5. G. Fabbri, C.
Boccaletti, L. Anniballi, M. London, F. Calenne, F. M. F. Mascioli, A. J. M.
Cardoso (2013). Adding ICT to Transportation Systems: Monitoring and Management System
for the Electric Vehicle Fleet on the Island of Ventotene. INTERNATIONAL
JOURNAL OF COMPUTER THEORY AND ENGINEERING, vol. 5, p. 268-272 - 2013
· A number of papers
published in Italian and international journals and works presented and
registered in the acts of Italian and international conferences.
· Author reports and
chairman in conferences and seminars.
Reviewer for the following Journals and
Conferences
·
IEEE ISIE Symposium on
Industrial Electronics
·
IECON
Conference of IEEE Industrial Electronics
·
ICCSIT IEEE International Conference on Computer Science and Information
Technology
·
INTELEC International Telecommunications Energy Conference
·
IET Journal,
Electrical Systems in Transportation
·
IEEE
Transactions on Instrumentation & Measurement
·
IMCIC International Multi-Conference on Complexity, Informatics and
Cybernetic
·
CCISE Complexity, Cybernetics and Informing Science and Engineering
Conference.
Session Chair for the following
Conferences
§ IEEE ISIE Symposium on Industrial Electronics
§ ICCSIT IEEE
International Conference on Computer Science and Information Technology
§ IMCIC International
Multi-Conference on Complexity, Informatics and Cybernetic
§ IASTED BIOMED
International Conference on Biomedical Engineering
Other scientific activities and
achievements
§ Member of the IEEE Energy Storage Devices and Systems (ESDS)
Technical Committee
§ Edited book
initiative on the topic “Energy storage Devices and Systems for Automotive
Applications”;
§ Founding member of
the Italian Neuro-Biology Society
§ Best publication
award for paper “A SOFTWARE TOOL FOR THE EVALUATION OF BIOELECTRICAL CURRENTS BEHAVIOUR”, IMCIC2010
List of participation in conference,
workshops.
1. ICEM 2002 15th International Conference on Electrical Machines.
2. EETI 2004-5th International Congress Energy, Environment and
Technological Innovation,
3. PSE05 5th International Conference on Power Systems and Electromagnetic
compatibility August 23-25, 2005, Corfu Island (Greece).
4. SPEEDAM 2006.
5. ICEM 2006.
6. ENER 2006,
Figueira da Foz (PORTUGAL).
7. Workshop on
Hybrid and Solar Vehicles 2006, Salerno, Italy.
8. POWERENG 2007 Setúbal, (Portugal).
9. ICREPQ 2007, Valencia, Spain.
10. COMADEM07
11. INTELEC 2007
International Telecommunications Energy Conference 30-sept 4-ott 2007 Rome.
12. ISEF 2007
International Symposium on Electromagnetic Fields in Mechatronics,
electrical and Electronic Engineering, Praga 13-15 Sett 2007
13. ICEM ’08 - XVIII
International Conference on Electrical Machines
14. EuroPES 2008 8th
IASTED International Conference on Power and Energy Systems
15. Biomed2008 sixth
IASTED International conference on Biomedical Engineering
16. ICREPQ08
International Conference on Renewable Energy and Power Quality
17. International Multi Conference on Complexity, Informatics and Cybernetics,
IMCIC2010
18. ICST2010, Proceedings of The 4th International Conference on Sensing
Technology.
19. ICEM 2010
International Conference on Electrical Machines.
20. International Conference on Computer Science and Information Technology
2010.
21. IEE-ICCSIT2011, International Conference on Computer Science and
Information Technology.
22. International Telecommunications Energy Conference, INTELEC 2011,
October 2011.
23. ISIE 2012 – The 21th IEEE International Symposium on Industrial
Electronics, 28-31 May 2012, Hangzhou, Zhejiang, China.
24. The 20th International Conference on Electrical Machines, ICEM’2012,
September 2-5, 2012, Marseille – France.
25. EWGT, 15th meeting of the Euro working Group on Transportation, Septmber
10-13 2012, Paris, France.
26. Chairman at the workshop: Il futuro della mobilità: Nuove tecnologie e
sistemi integrati. Rome 26 February 2013
27. Chairman: Clean Energy for Sustainable Mobility. Innovation and
development in Austria and Italy. Rome, March 21st 2013.
28. Delegate: DGEF2013, Dubai Global Energy Forum, Dubai, UAE April
2013.
29. Speaker: REALCORP 2013, International
Conference on Urban Planning and Regional Development in the Information
Society, Rome, May 2013
30. Invited Lecturer: “Research Activities and Technology Transfer
Experiences in Italy” . Michigan Shangai Jiao Tong University, Shanghai, China,
May 2013.
31. Chairman: IEEE International Symposium on Industrial Electronics,
Taipei, Taiwan, May 28-31, 2013.
32. Member of the PhD international commission ate the Politecnic University
of Madrid, Madrid 24-27 June 2013.
33. Speaker: NANOFORUM 2013, Micro Nano and Advanced Technologies, 18-20
Settembre 2013, Roma.
34. Chaiman Workshop Civitas “La mobilitá urbana nelle cittá italiane:”, 21
February 2014, Rome, Italy.
35. Ecologicamente, Workshop, Mobilità sostenibile a sostegno del Turismo
Locale, Napoli, Italy, 08 May, 2014.
36. I giovani e l’Agenda Sostenibile, Speaker, Master GEM Green Economy
Management, 28 May 2014 , Città dell’altra Economia, Roma.
37. Chairman: IEEE International Symposium on Industrial Electronics,
Turkey, June 01-04, 2014.
38. Invited lecturer: Lazio – Tianjin Business Workshop, October, 18, 2014.
39. Invited lecturer: European project Space Panel, IJCCI 2014, 7th International
Joint Conference on Computational Intelligence, October23, 2014.
40. Invited lecturer: Workshop best practices in the region of Lazio, BIC
LAZIO, December 16, 2015.
41. Invited Expert: “Promoting local electric mobility”, European project:
CIVITAS Workshop, February, 10, 2015, Aachen, Germany
Interests and Hobbies
§ Rugby, guitar, travel, reading,
drawing, manual labour, memory and learning techniques.

Ciao Gianluca,
RispondiEliminasto cercando il tuo contatto ma non riesco a trovarlo.
ti lascio il mio numero. 3923044109 gianluca brilli